The maintenance of bearings should avoid these pits:
In order to better maintain the original characteristics of bearings for as long as possible, maintenance and repair must be carried out to avoid safety accidents, ensure the reliability of operation, and improve production efficiency and rationality. The actual operation standards for maintenance and upkeep are very good compared to the actual operation standards for mechanical equipment. It includes checking the actual operating standards, filling or replacing lubricating grease, and disassembling and assembling on time. As a new maintenance project during operation, it includes bearing rotation noise, vibration, temperature, lubrication standards, etc. Other information related to these aspects.
Generally speaking, if applied properly, bearings can be used for their fatigue life. But accidents may occur too early and cause damage, which cannot tolerate the application situation. In contrast to the fatigue life, this type of initial damage limits the quality of applications referred to as common failures or safety accidents. Many of the problems caused by installation, application, and lubrication that do not require attention to external invasion of dirt, scientific research on the thermoelectric effect of the shaft, and the housing are insufficient.
For the damage of bearings, such as the damage of roller bearing flanges, considering the reasons, insufficient grease, defects that are not suitable for gas structure, invasion, incorrect bearings, and high bearing music, this reason will overlap.
Therefore, only by investigating the condition of bearing damage can the true cause of the damage be understood. However, if you understand the application standards of bearing mechanical equipment, the application standards, the structure around the bearings, grasp the situation before, after, and after the occurrence of safety accidents, and combine many reasons for bearing damage and inspection, you can avoid similar safety accidents from happening again.

• Previous：Did you pay attention to whether the bearings were installed or not?
• Next：Good use of lubricating oil with few bearing problems